Shiftmate 1
This model is for mixing wheelsets or Campagnolo & Shimano 8, 9 & 10 speed shifting combinations..
– Shimano 8, 9 & 10 speed shifters & derailleur to Campagnolo 8, 9 & 10 speed cassettes
– Campagnolo 8, 9 & 10 speed shifters & derailleur to Shimano 8, 9 & 10 speed cassettes
Using a ratio changing pulley, the ShiftMate adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting. There are no compromises when using a ShiftMate. Your shifting will perform equally or better than original factory components.
– CNC machined.
– Sealed ball bearing.
– Hard Nickel plating.
– Reduces cable friction and cable housing length.
– Wide range of component mates and interfacing.
– Small compact design only 12 grams.
– Save money by upgrading over time or using components and wheelsets you already own.
For mixing wheel sets or Campagnolo & SRAM shifters.
| Shifter | Derailleur | Cassette type and speed | Pulley groove that cable enters |
|---|---|---|---|
| Shimano 8 speed road or MTB | Shimano road to 10*, MTB to 9 speed | Campagnolo 8 speed | Small |
| Shimano 9 speed road or MTB | Shimano road to 10*, MTB to 9 speed | Campagnolo 9 speed | Small |
| Campagnolo 10 speed | Shimano road to 10*, MTB to 9 speed | Campagnolo 10 speed | Large |
| Shimano road 10 speed* | Shimano road to 10*, MTB to 9 speed | Campagnolo 10 speed | Small |
| Shimano MTN 10 speed | Shimano MTB 10 speed | Campagnolo 10 speed | Small |
| SRAM road 10 speed | SRAM road 10 speed | Campagnolo 10 speed | Small |
| Campagnolo 8 speed | Campagnolo | Shimano 8 speed | Large |
| Campagnolo 9 speed | Campagnolo | Shimano 9 speed | Large |
| Campagnolo 9 speed | Campagnolo | Shimano 8 speed | Small |
| Campagnolo 10 speed | Campagnolo | SRAM or Shimano 10 speed | Large |
| Campagnolo 10 speed | Campagnolo | Shimano 9 speed | Small |
| Campagnolo 10 speed | SRAM 10 speed road | SRAM or Shimano 10 speed | Large |
| SRAM 10 speed road | Campagnolo 10 speed | Campagnolo 10 speed | Small |
| Shimano 11 speed road | Shimano 11 speed road | SRAM or Shimano 10 speed | Small |
| Shimano 11 speed MTN | Shimano 11 speed MTB | SRAM or Shimano 10 speed | Small |
| SRAM 11 speed road | SRAM 11 speed road | SRAM or Shimano 10 speed | Small |
| SRAM 11 speed MTN | SRAM 11 speed MTB | SRAM or Shimano 10 speed | Small |
| Shimano 11 speed road | Shimano Tiagra 4700 10 speed | SRAM or Shimano 10 speed | Small |
*Except Shimano Tiagra 4700 10 speed shifters and rear derailleur
For installation you will require a gear cable end cap with an external diameter of 5.3mm.
The Clarks Plastic Gear Ferrule for 4 mm Gear Outer Cable meets this specification (SJSCycles part 5269)