Designed for fitting a 34.9mm front mech on a 28.6mm frame allowing adjustment outside of the mech’s normal range front to back and/or in and out, ie moving the effective range of the cage nearer the frame or further out.
Made from plastic flexible enough to open to 29mm and snap around the down tube.
45mm brass dome bell with ping type spring striker. Fitted to an alloy ring which replaces a headset spacer on regular 1 1/8 inch (28.6mm) steerer tubes. Fits left or right.
This device converts top pull front derailleurs to bottom pull and bottom pull front derailleurs to top pull.
Available in 3 sizes 28.6, 31.8 and 34.9mm clamp diameter.
Pulley wheel has plastic shield to fend off dirt and grime.
CNC machined AL6061 T6 alloy in black finish with silver Jtek logo.
Extra short, facilitates cable removal from rear V brake on an S+S coupled frame.
Accepts 1.6mm gear wire.
Gear cable connector with single grub screw. Top quality, aluminium. Accept one open end, and one gear nipple.
Accepts 1.1mm or 1.3mm gear wire.
No nonsense good quality pedal extenders from Jtek.
If you need a slightly more toe out foot riding position to relieve knee pain or to reduce heel rub on your crank arms try these pedal axle extenders.
– For 9/16 inch pedal threads
– Cr-Mo Steel
– Per Pair
Jtek Alloy Dynamo Headlamp Bracket M5 Fork Crown Mounting – Black
V-brake or cantilever compatible. ***NOT FOR B+M OVAL Plus*** V-brake or cantilever brake (with spacing adaptor) compatible. High quality CNC’d alloy headlight bracket, anodized black. Includes: M5 x 20mm socket allen key bolt (for use with V-brake equipped cycles), M5 x 40mm socket allen key bolt and alloy spacer (for use with Cantilever equipped cycles), M6 x 25mm button head allen key bolt / 2 x M6 washers / 1 x M6 nylock nut (for headlight mounting). Unlike pressed steel headlight brackets this tough bracket will not fatigue and fail from road vibrations.