Using a ratio changing pulley, the ShiftMate adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting. There are no comprimises when using a ShiftMate. Your shifting will perform equally or better than original factory components.
ShiftMate features and benefits:
CNC machined
Sealed ball bearing
Reduces cable friction and cable housing length
Wide range of component mates & interfacing
Small compact design only 12 grams
Save money by upgrading over time or using components and wheelsets you already own.
For mixing shifters
Shifter
Derailleur
Cassette type and speed
Pulley groove size that cable enters
Shimano 9 speed road or MTB
Shimano road to 10*, MTB to 9 speed
Shimano 6 speed freewheel
Small
Shimano 9 speed road or MTB
Campagnolo
Campagnolo 9 speed
Small
Shimano 10 speed road*
Campagnolo
Campagnolo 10 speed
Small
Shimano 10 speed road*
Shimano 10 speed road*
Shimano 7 or 8 speed
Small
Shimano 10 speed MTB
Shimano 10 speed MTB
Shimano 7 or 8 speed
Small
Shimano 10 speed Tiagra 4700
Shimano 10 speed Tiagra 4700
Shimano 7 or 8 speed
Small
2001 and newer Campagnolo 9 speed
Shimano road to 10*, MTB to 9 speed
Shimano 9 speed
Large
Campagnolo 10 speed
Shimano road to 10*, MTB to 9 speed
Shimano 10 speed
Large
Campagnolo 12 speed
Campagnolo 12 speed
Shimano 9 speed
Small
*Except Shimano Tiagra 4700 10 speed shifters and rear derailleur
For installation you will require a gear cable end cap with an external diameter of 5.3mm.
The Clarks Plastic Gear Ferrule for 4 mm Gear Outer Cable meets this specification (SJSCycles part 5269)
This model is for mating different speed shifters to different speed drivetrains.
The ShiftMate is a shifting interface device for mating Shimano SRAM and Campagnolo bicycle shifting components and wheelsets. Using a ratio changing pulley, the ShiftMate adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting. There are no compromises when using a ShiftMate. Your shifting will perform equally or better than original factory components.
ShiftMate features and benefits:
CNC machined
Sealed ball bearing
Reduces cable friction and cable housing length
Wide range of component mates & interfacing
Small compact design only 12 grams
Save money by upgrading over time or using components and wheelsets you already own.
For mixing speeds & shifters
Shifter
Derailleur
Cassette type & speed
Pulley groove size that cable enters
Campagnolo 12 speed Ergopower
Campagnolo
Campagnolo 11 speed
Small
Campagnolo 12 speed Ergopower
SRAM or Shimano 12 speed MTN
SRAM or Shimano 12 speed
Small
SRAM or Shimano 12 speed MTN
Campagnolo 12 speed
Campagnolo 12 speed
Large
SRAM 10 speed road
Shimano road to 10*, MTB to 9 speed
SRAM or Shimano 10 speed
Small
Shimano 8 speed road or MTB
Pre 2001 Campagnolo
Shimano 8 speed
Small
Shimano 9 speed road or MTB
Shimano road to 10*, MTB to 9 speed
Shimano 8 speed - only 8 available gears
Small
Shimano 9 speed road or MTB
Campagnolo
Campagnolo 10 speed
Small
Shimano 9 speed road or MTB
Shimano road to 10*, MTB to 9 speed
Shimano 10 speed - only 9 available gears
Large
Shimano 10 speed road*
Shimano road to 10*, MTB to 9 speed
Shimano 9 Speed
Small
Shimano 10 speed MTB
Shimano 10 speed MTB
Shimano 9 Speed
Small
2001 & newer Campagnolo 9 speed
Shimano road to 10*, MTB to 9 speed
Shimano 8 speed
Large
2001 & newer Campagnolo 9 speed
Campagnolo
Campagnolo 10 speed - only 9 available gears
Large
2001 & newer Campagnolo 9 speed
Campagnolo
Campagnolo 8
Small
2001 & newer Campagnolo 8 speed
Campagnolo
Campagnolo 9 - only 8 available gears
Large
Campagnolo 10 speed
Shimano road to 10*, MTB to 9 speed
Shimano 9 speed
Large
Campagnolo 10 speed
Campagnolo
Campagnolo 9 speed
Small
Campagnolo 10 speed
Campagnolo
Shimano / SRAM / Campagnolo 11 speed - only 10 available gears
Large
Campagnolo 11 speed
Campagnolo
Campagnolo 10 speed
Small
*Except Shimano Tiagra 4700 10 speed shifters and rear derailleur
For installation you will require a gear cable end cap with an external diameter of 5.3mm.
The Clarks Plastic Gear Ferrule for 4 mm Gear Outer Cable meets this specification (SJSCycles part 5269)
Using a ratio changing pulley, the ShiftMate adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting. There are no compromises when using a ShiftMate. Your shifting will perform equally or better than original factory components.
– CNC machined.
– Sealed ball bearing.
– Hard Nickel plating.
– Reduces cable friction and cable housing length.
– Wide range of component mates and interfacing.
– Small compact design only 12 grams.
– Save money by upgrading over time or using components and wheelsets you already own.
For mixing wheel sets or Campagnolo & SRAM shifters.
Shifter
Derailleur
Cassette type and speed
Pulley groove that cable enters
Shimano 8 speed road or MTB
Shimano road to 10*, MTB to 9 speed
Campagnolo 8 speed
Small
Shimano 9 speed road or MTB
Shimano road to 10*, MTB to 9 speed
Campagnolo 9 speed
Small
Campagnolo 10 speed
Shimano road to 10*, MTB to 9 speed
Campagnolo 10 speed
Large
Shimano road 10 speed*
Shimano road to 10*, MTB to 9 speed
Campagnolo 10 speed
Small
Shimano MTN 10 speed
Shimano MTB 10 speed
Campagnolo 10 speed
Small
SRAM road 10 speed
SRAM road 10 speed
Campagnolo 10 speed
Small
Campagnolo 8 speed
Campagnolo
Shimano 8 speed
Large
Campagnolo 9 speed
Campagnolo
Shimano 9 speed
Large
Campagnolo 9 speed
Campagnolo
Shimano 8 speed
Small
Campagnolo 10 speed
Campagnolo
SRAM or Shimano 10 speed
Large
Campagnolo 10 speed
Campagnolo
Shimano 9 speed
Small
Campagnolo 10 speed
SRAM 10 speed road
SRAM or Shimano 10 speed
Large
SRAM 10 speed road
Campagnolo 10 speed
Campagnolo 10 speed
Small
Shimano 11 speed road
Shimano 11 speed road
SRAM or Shimano 10 speed
Small
Shimano 11 speed MTN
Shimano 11 speed MTB
SRAM or Shimano 10 speed
Small
SRAM 11 speed road
SRAM 11 speed road
SRAM or Shimano 10 speed
Small
SRAM 11 speed MTN
SRAM 11 speed MTB
SRAM or Shimano 10 speed
Small
Shimano 11 speed road
Shimano Tiagra 4700 10 speed
SRAM or Shimano 10 speed
Small
*Except Shimano Tiagra 4700 10 speed shifters and rear derailleur
For installation you will require a gear cable end cap with an external diameter of 5.3mm.
The Clarks Plastic Gear Ferrule for 4 mm Gear Outer Cable meets this specification (SJSCycles part 5269)
Designed for mixing SRAM 11 speed road shifter with SRAM 11 speed MTN deraileur.
Please note that the pully cannot be reversed to use MTN shifter with road derailleur.
This model is for mating Shimano & Campagnolo triple road shifters with mountain bike front derailleurs and cranks or mountain bike front shfiters with road triple cranksets.
The ShiftMate Straight is an inline shifting interface device for mating different bicycle shifting components. Using a ratio changing pulley, the ShiftMate Straight adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting.
– CNC machined.
– Sealed ball bearing.
– Hard Nickel plating.
– Ideal for straight cable run mounting or mounting at cable stop locations.
This Shiftmate is just to improve the cable line into the rear mech, it leads to crisper gear changes. Replaces older items (no longer available) such as Avid Rollamajig, Mr Control Roller (really for V-brakes), Acor Pizza Cutter, Tiso P-Pue and Crud Cog Hog.
Avid Rollamajig Acor Pizza Cutter Crud Cog Hog
This model is for mating Shimano 11 road STI levers with Shimano 11 MTN rear derailleur and cassette or 11 speed MTN rapidfire levers with Shimano 11 speed road rear derailleur and cassette.
The ShiftMate Straight is an inline shifting interface device for mating different bicycle shifting components. Using a ratio changing pulley, the ShiftMate Straight adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting.
– CNC machined.
– Sealed ball bearing.
– Hard Nickel plating.
– Ideal for straight cable run mounting or mounting at cable stop locations.
This model is for mating Shimano shifters with SRAM 1:1 derailleurs or SRAM non-road shifters with Shimano derailleurs.
It will also let you run Shimano 10 speed road STI with Shimano MTN 10 Dyna-Sys derailleurs and Shimano or SRAM cassettes.
The ShiftMate Straight is an inline shifting interface device for mating different bicycle shifting components. Using a ratio changing pulley, the ShiftMate Straight adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting.
– CNC machined.
– Sealed ball bearing.
– Hard Nickel plating.
– Ideal for straight cable run mounting or mounting at cable stop locations.
This model is for mating Campagnolo 2001+ shifters with SRAM 1:1 derailleurs. – see compatiblity guide.
The ShiftMate Straight is an inline shifting interface device for mating different bicycle shifting components. Using a ratio changing pulley, the ShiftMate Straight adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting.
– CNC machined.
– Sealed ball bearing.
– Hard Nickel plating.
– Ideal for straight cable run mounting or mounting at cable stop locations.
This model is for mating older Pre-2001 8 & 9 speed Campagnolo components with Shimano 8 & 9 speed components. You can also match newer Campagnolo 11 speed with Shimano 10 speed components. Please check the link above for all suitable combinations.
Using a ratio changing pulley, the ShiftMate adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting. There are no comprimises when using a ShiftMate. Your shifting will perform equally or better than original factory components.
ShiftMate features and benefits:
CNC machined
Sealed ball bearing
Reduces cable friction and cable housing length
Wide range of component mates & interfacing
Small compact design only 12 grams
Save money by upgrading over time or using components and wheelsets you already own.